UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4355

4.2i Foundation - A "Cannot copy Xilinx project with different name" warning appears when I copy a Foundation project

Description

Keywords: copy, PCM, XPROJ, Xilinx

Urgency: Standard

General Description:
When I copy a project in Foundation Project Manager, the following warning is reported:

"PCM: Cannot copy Xilinx project with different name."

解决方案

When a project is copied in Foundation, you must copy it to the same name as the original project in order for the design implementation versions and revisions contained within the Xilinx project (XPROJ) to be copied as well. The new copy of the project should be in a different directory location than the first, but the name must remain the same in order for the project to be successfully copied.

The Xilinx project (contained within the Foundation project) contains the implementation versions and revisions. If you do not wish to copy the Xilinx project information to the new project, then you may ignore this warning. If this is the case, your design implementation versions from the original project will not be present in the new project.
AR# 4355
创建日期 07/28/1998
Last Updated 08/12/2003
状态 Archive
Type 综合文章