We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43587

MIG Spartan-6 MCB - Datapath


The Spartan-6 MCB includes a datapath. The datapath handles the flow of write and read data between the memory device and the user logic.

Each port contains a command path and a datapath. For a uni-directional port, a command path is paired with a single read-only or a single write-only datapath. However, for a bi-directional port, a single command path is shared by both the read and write datapaths associated with that port. FIFOs are used at the User Interface of the command path and datapath to queue up memory requests and to manage the transfer from the user clock domain to the memory controller clock domain.

NOTE: This Answer Record is part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


In the datapath, the underlying hardware contains six 32-bit ports, two of which are inherently bi-directional. The other four ports are inherently uni-directional, but can be combined to create bi-directional ports as well. There are five possible port configurations that combine these six hardware ports to implement the desired User Interface. The width of the read and write data word fields of the User Interface are naturally determined by the chosen configuration.

The datapath FIFOs are 64 deep, allowing for burst lengths of up to 64 data words from a given start address. In addition to the data word field, the write path FIFOs contain mask bit fields that allow optional masking of write data on a per byte basis. Full, empty, underrun, count, and error outputs indicate the current status of the write data FIFOs. The read data FIFOs have a similar set of status outputs.

For more details on the read and write datapath signals,see the Spartan-6 FPGAMemory Controller User Guide(UG388):

Navigate to the "MCB Functional Description" -> "Interface Details" section.



Answer Number 问答标题 问题版本 已解决问题的版本
43586 MIG Spartan-6 MCB - Controller Architecture Design N/A N/A
AR# 43587
日期 12/15/2012
状态 Active
Type 综合文章
  • Spartan-6 LX
  • Spartan-6 LXT
  • MIG