AR# 43708

AXI Bridge for PCI Express - Changing C_AXIBAR_NUM does not grey out unused C_AXIBAR_#

描述

Version Found: 1.00.a
Version Resolved and other Known Issues: See (Xilinx Answer 44969) 

The C_AXIBAR_NUM attribute describes the number of translations from the AXI address space to the PCI Express address space. The customization GUI for the AXI Memory Mapped core for PCI Express does not grey out the upper C_AXIBAR_# fields when the C_AXIBAR_NUM value indicates the C_AXIBAR_# will not be used. 

This issue also results with additional BARs in the address space in the Address tab of the System Assembly View.

NOTE: The "Version Found" column lists the version that the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

解决方案

This is a known issue. Please ignore the upper C_AXIBAR_NUM values in the Address tab of the System Assembly View as they will not be used. 

This issue has been fixed in 13.3 with revision v1.01a of the bridge.

Revision History
11/21/2011 - Updated for 13.3
09/04/2011 - Initial Release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A
AR# 43708
日期 05/26/2014
状态 Archive
Type 已知问题
IP