We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44503

13.2 iMPACT - Cable Driver Install - Jungo driver installation fails on SUSE 11


When trying to install ISE 13.2 on SUSE 11, the Jungo driver fails to build and the install log shows the following:

--make windrvr install rc= 2
--install_windrvr6 rc = 2
--Module windrvr6 is not running.
--Module xpc4drvr is not running.
--Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
  and must be changed to allow access to other users.
--Return code = 2

How do I work around this issue?


This issue is resolved in ISE 13.3 software. To work around this issue in ISE 13.2 software, you can use the LIBUSB driver as described in (Xilinx Answer 29310).



Answer Number 问答标题 问题版本 已解决问题的版本
40503 13.x iMPACT - Known Issues for the iMPACT 13.x Software N/A N/A
AR# 44503
日期 01/31/2018
状态 Active
Type 综合文章
Boards & Kits