AR# 44512

CoolRunner-II Starter Kit - How do I reflash the ATMEL USB controller on this board?

描述

I have experienced problems with USB communication with my CoolRunner-II CPLD Starter Kit. How can Ireload the code for theATMEL USB controller?

解决方案

The CoolRunner-II CPLD Starter Kit uses the Atmel AT90USB162 USB controller. If problems with USB communication are suspected, then the code for this controller can be reloaded.

To reload this code, the AVR Programmer utility needs to be downloaded from the Digilent website:
http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,66,67&Prod=AVR-SOFTWARE

A JTAG-USB cable is then used to program the board with the files:http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-USB

While this is a Digilent Development Board, the necessary files are available from Xilinx Technical Support. Please open a Webcase, quoting this Xilinx Answer numberto receive these files:http://www.xilinx.com/support/clearexpress/websupport.htm


Note:
This firmware is not compatible with the latest Digilent Adept software. The software provided on the CD shipped with the CoolRunner-II CPLD Starter Kitmust be used.

The CoolRunner-II CPLD Starter Kit is a mature product and is subject to obsolescence in accordance with XCN11027.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
44436 CoolRunner-II Starter Kit - Known Issues and Release Notes Answer Record N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
44436 CoolRunner-II Starter Kit - Known Issues and Release Notes Answer Record N/A N/A
AR# 44512
日期 02/28/2013
状态 Active
Type 综合文章
Boards & Kits