UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44546

Soft Error Mitigation Controller - EXT Shim module generates the use 32-bit addressing command for all 7 Series configurations

描述

Known Issue: v3.1

The external (EXT) shim module generates the use 32-bit addressing command for any 7 Series device even if it is not needed.

For all Soft Error Mitigation Controller known issues see (Xilinx Answer 44541).

解决方案

If EXT Shim is delivered (based on core configuration) the B_USEBIGADDR parameter in sem_ext.{v|vhd} is always set to '1". 

However, it should be set based on the core configuration and the target device.

This issue is resolved in ISE version 14.1, please upgrade to this version.

 

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
44541 Soft Error Mitigation Controller - Release Notes and Known Issues for v1.1 to v3.4 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
44541 Soft Error Mitigation Controller - Release Notes and Known Issues for v1.1 to v3.4 N/A N/A
AR# 44546
日期 09/12/2014
状态 Active
Type 已知问题
器件
IP
的页面