UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44664

Virtex-5 GTP - 1Gbps line rate does not work when targeting a Virtex-5 LX20T device

描述

If I target a Virtex-5 LX20T device, the GTP IBERT core does not linkwith a line rate of 1Gbps.

解决方案

The 1Gbps line rate does not work when targeting the Virtex-5 LX20T device.This is not a limitation of the GTP transceiver inside the device, but a limitation of the IBERT core. Since the IBERT core is intended to be used as a method of tuning the PMA inside the GT for the board, the best work-around is to use a 2Gbps line rate instead and tune the transceiver using the higher line rate.
AR# 44664
日期 01/02/2013
状态 Active
Type 已知问题
器件
  • Virtex-5 LXT
Tools
  • ChipScope Pro - 11.3
  • ChipScope Pro - 11.4
  • ChipScope Pro - 11.5
  • More
  • ChipScope Pro - 10.1
  • ChipScope Pro - 10.1 sp1
  • ChipScope Pro - 10.1 sp2
  • ChipScope Pro - 10.1 sp3
  • ChipScope Pro - 11.1
  • ChipScope Pro - 11.2
  • ChipScope Pro - 12.1
  • ChipScope Pro - 12.2
  • ChipScope Pro - 12.3
  • ChipScope Pro - 12.4
  • ChipScope Pro - 13
  • ChipScope Pro - 13.1
  • ChipScope Pro - 13.2
  • ChipScope Pro - 13.3
  • Less
的页面