We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45158

AXI Bridge for PCI Express - Does the bridge need to be setup via the control interface?


The AXI Bridge for PCI Express includes a control interface allowing the user to write to many of the control registers. Do any of control registers need to be written to to place the bridge into normal operation?


Unlike the PLBv46 Bridge for PCI Express, the AXI Bridge for PCI Express does not require writing to any of the control registers. Instead, the bridge is ready to use upon the link being established. To check whether the link is up, read the Link Up bit in the PHY Status/Control Register (Offset 0x144).

Revision History:
11/27/2011 - Initial Release



Answer Number 问答标题 问题版本 已解决问题的版本
44972 AXI Bridge for PCI Express FAQ N/A N/A
AR# 45158
日期 12/15/2012
状态 Active
Type 综合文章
  • AXI PCI Express (PCIe)