2. 技术支持
  3. AR# 45278: LogiCORE IP DisplayPort v2.3 - Why do I get an error in MAP for the Hot Plug Detect (HPD) pin, when trying to target Kintex-7 FPGA?

AR# 45278

LogiCORE IP DisplayPort v2.3 - Why do I get an error in MAP for the Hot Plug Detect (HPD) pin, when trying to target Kintex-7 FPGA?

描述

Why do I receive an error in MAP for the Hot Plug Detect (HPD) pin, when trying to target a Kintex-7 FPGA?

ERROR:Pack:2503 - The "IOB33" component is not supported in this particular device.

解决方案

This is because the output standard used for HPD is not supported for all Kintex-7 devices.

This will be fixed in the LogiCORE DisplayPort v3.1.


To work around this issue, make the following changes:

UCF:
 

NET "hpd"               IOSTANDARD = "LVCMOS18";



dport_rx_phy.v,

    //----------------------------------------------
    // Hot Plug Detect
    //----------------------------------------------
    OBUF_LVCMOS18 hot_plug_detect_inst (
        .O (hpd),
        .I (hot_plug_detect)
    )



Please see (Xilinx Answer 33258) for a detailed list of LogiCORE IP DisplayPort Release Notes and Known Issues.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
33258 LogiCORE IP DisplayPort - Release Notes and Known Issues N/A N/A
AR# 45278
日期 08/11/2014
状态 Archive
Type 综合文章
器件
IP