AR# 45646: 13.1, 13.2, 13.3, 13.4 Kintex-7, Virtex-7 - GTX IBERT does not work when using 32-bit DATA_WIDTH
13.1, 13.2, 13.3, 13.4 Kintex-7, Virtex-7 - GTX IBERT does not work when using 32-bit DATA_WIDTH
When I use the Kintex-7 or Virtex-7 FPGA GTX IBERT core with a 32-bit DATA_WIDTH, the IBERT design does not work (GTs do not link at all).
This issue only affects users who use IBERT under the following conditions:
Using 13.1, 13.2, 13.3, or 13.4versions of ISE designtools.
Targeting a Kintex-7 or Virtex-7 device.
Using a 32-bit DATA_WIDTH when generating the IBERT core
In software versions 13.4 and earlier, the timing constraints are not written correctly for the 32-bit version of the core, which causes it to miss timing during implementation.This causes linking problems with the 32-bit data width IBERT designs.
To work around this issue, do not select 32-bit data widths when generating the core; use a 40-bit data width instead. This issue will be addressed in ISE Design Suite 14.1.