UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45753

14.3 PlanAhead - ngc2edif error - [ERROR-105] parse error ... EDIF file was not written properly by 'Xilinx ngc2edif'

描述

When Running PlanAhead and importing  an NGC file, it fails to convert to EDIF and gives the following error:

Unable to create project: ERROR: [EDIF-105] Parse error on or above line 2116425. EDIF file was not written properly by 'Xilinx ngc2edif'

If the ngc is converted with the ngc2edif command via the command line, it converts the file but the format is unreadable to PlanAhead.

解决方案

This issue has been fixed in PlanAhead 14.4.

Lines in the EDIF file that are causing the problem might look like the following:

591249 (property OFFSET (string IN 5000.000000 pS VALID 5000.000000 pS BEFORE "jtag_tck") (owner "Xilinx"))
591255 (property OFFSET (string IN 5000.000000 pS VALID 5000.000000 pS BEFORE "jtag_tck") (owner "Xilinx"))

Work-around: If constrains from the code are defined in HDL, try moving them into the .ucf file.


AR# 45753
日期 01/30/2015
状态 Archive
Type 已知问题
器件
  • Virtex-6 LXT
Tools
  • PlanAhead - 13.2
的页面