UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45809

13.x iMPACT - LabTools - iMPACT crashes when I attempt to program a Zynq xc7z020 device

描述

When attempting to initialize a chain containing a Zynqxc7z020 device, iMPACT will crash. There is no warning-- the tool will just close.What is the issue here?

解决方案

This is an issue that will occur only with the LabTools installation of ISE software. If you have a full installation of ISE software,you can program this device without any issues. If you cannot work around this issue by using a full ISE installation, please contact Technical Support -

http://www.xilinx.com/support/clearexpress/websupport.htm

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
40503 13.x iMPACT - Known Issues for the iMPACT 13.x Software N/A N/A
AR# 45809
日期 12/15/2012
状态 Active
Type 综合文章
器件
  • Zynq-7000
Tools
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
的页面