AR# 45939


LogiCORE IP CPRI v4.1 - A Rev1 Patch Update to enable the operation of the CPRI core at speeds up to 9.830 bps on General ES of the Virtex-7 and Kintex-7 FPGA parts


This answer record contains patch updates for the LogiCORE IPCPRI v4.1 to enable the operation of the CPRI core at speeds up to 9.830 Gbps on General Engineering Samples(ES) of the Virtex-7 and Kintex-7 FPGA parts.


CPRI v4.1 ISE 13.4 Patch

For a detailed list of LogiCORE IP CPRI Release Notes and Known Issues, as well as issues that are fixed by this patch, see (Xilinx Answer 36969).

Installation and Use

Prior to installing the update, you must install the latest ISE Design Suite release of13.4, as required by the patch. The ISE Design Suite release can be obtained from the following link:

Install the patch by extracting the contents of the ZIP archive to the root directory of XILINX (Xilinx ISE software installation), or your MYXILINX environment variable. 

Select the option that allows the extractor to overwrite all of the existing files and maintain the directory structure predefined in the archive.

For information on finding the Xilinx install and using the environment variable, see (Xilinx Answer 11630).

For information on using the MYXILINX environment variable, see (Xilinx Answer 2493).

Note: If you do not have write permissions to the Xilinx Install directory, or cannot use the MYXILINX option, you might be required to have a system administrator install the patch.

You can determine if the patch has been properly installed by checking to see if RevX (where X is the patch number) is listed in the Description field when the core is selected in the CORE Generator tool.


文件名 文件大小 File Type 65 KB ZIP
AR# 45939
日期 01/19/2018
状态 Archive
Type 已知问题
People Also Viewed