UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45965

LogiCORE IP OBSAI v5.1 - What files need to be changed in ISE Design Suite 13.4 to support General Engineering Silicon (GES) for Kintex-7 devices?

描述

What files need to be changed in ISE Design Suite 13.4 (for the LogiCORE IP OBSAI v5.1) to support General Engineering Silicon (GES) for Kintex-7 devices?

解决方案

The OBSAI v5.1 core, as delivered from the CORE Generator tool, will not directly support operation on General Engineering Sample (GES) Kintex-7 devices.

To enable operation on GES devices, it is necessary to replace the source code wrapper files around the GTXE1 Transceiver.

This answer record provides updated source code files and instructions for applying these updates to a generated OBSAI core.

Themodified source files for theOBSAI v5.1 can be downloaded at:
http://www.xilinx.com/txpatches/pub/swhelp/ise13_updates/ar45965_obsai_v5_1_ise13_4_files.zip

Inthe ZIP file, there aretwo files provided:

  • gtx_and_clocks_GES_3G.zip: replaces the relevant files for a core generated to support up to 3G line rate.
  • gtx_and_clocks_GES_6G.zip: replaces the relevant files for a core generated to support up to 6G line rate.

Instructions for applying the updates

  • EnsureISE Design Suite 13.4 is installed as it must be used in conjunction with these updates.

For a core supporting up to, and including, 3G line rate:

  1. Customize and Generate OBSAI v5.1 core from the CORE Generator tool (6G support check box is unchecked).
  2. Navigate to the <generated core name>/example_design folder.
  3. Copy the "gtx_and_clocks_GES_3G.zip"to this location.
  4. Unzip the ZIP file (allowit to overwrite the existing files).

For a core supporting up to, and including, 6G line rate:

  1. Customize and Generate OBSAI v5.1 core from the CORE Generatortool (6G support check box is checked).
  2. Navigate to the <generated core name>/example_design folder.
  3. Copy the"gtx_and_clocks_GES_6G.zip" to this location.
  4. Unzip the ZIP file (allow it to overwrite the existing files).

For Release Notes and Known Issues for the LogiCORE IP OBSAI, see (Xilinx Answer 36971).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
36971 LogiCORE IP OBSAI - Release Notes and Known Issues N/A N/A
AR# 45965
日期 05/20/2012
状态 Active
Type 已知问题
Tools
  • ISE Design Suite - 13.4
IP
  • OBSAI
的页面