AR# 45976

LogiCORE IP Serial RapidIO Gen2 v1.3 - SRIO v1.3 - WARNING:NgdBuild:931 - The value of SIM_DEVICE on instance...

描述


When implementing a LogiCORE IP Serial RapidIO Gen2 v1.3 core on a 7 Series device, it gives the following ngdbuild warning:

WARNING:NgdBuild:931 - The value of SIM_DEVICE on instance
'srio_dut_inst/srio_wrapper_inst/rio_buffer_inst/U0/buf_top_inst/buf_tx_inst/
buf_tx_bram_bank_inst/blk_mem_inst/gnativebmg.native_blk_mem_gen/valid.cstr/r
amloop[1].ram.r/v6_noinit.ram/SDP.SIMPLE_PRIM36.ram' of type RAMB36E1 has
been changed from 'VIRTEX6' to '7SERIES' to correct post-ngdbuild and timing
simulation for this primitive. In order for functional simulation to be
correct, the value of SIM_DEVICE should be changed in this same manner in the
source netlist or constraint file.

解决方案


This warning message can be safely ignored. Although the value of SIM_DEVICE is set to 'VIRTEX-6' in the ngc file, it is correctly set to '7SERIES' in the ngd file. However, this could result in a simulation mismatch between functional (post-XST) and routed (post-map/par) models. To work around this, manually replace 'VIRTEX-6' value of SIM_DEVICE with '7SERIES' in the generated buffer simulation model.

Revision History:
2/1/2012 - Initial Release
AR# 45976
日期 02/03/2012
状态 Active
Type 已知问题
IP