UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 46100

AXI Bridge for PCI Express - x8 gen 1 for Virtex-6 FPGA should issue a DRC error

Description

Version Found: 1.02.a
Version Resolved and other Known Issues: see (Xilinx Answer 44969)

The AXI Bridge for PCI Express does not support a Virtex-6 device configured as a x8. EDK does not issue a DRC error when a Virtex-6 device is targeted and configured as a x8.

解决方案

The EDK tools will allow a bit file to be generated and issue no error.However, this will not work in hardware.A DRC will be added in a future release of the core.

Revision History

03/05/2012 - Corrected link to version resolved AR.
01/31/2012 - Initial Release

NOTE:The "Version Found" columnlists the version that the problem was firstdiscovered. The problem might also exist in earlier versions, but no specific testing has been performedto verify earlier versions.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A
AR# 46100
创建日期 01/31/2012
Last Updated 05/20/2012
状态 Active
Type 已知问题
IP
  • AXI PCI Express (PCIe)