2. 技术支持
  3. AR# 46233: LogiCORE IP Video Deinterlacer v1.0 - When performing VFBC writes, why do I see a mismatch between documentation and the example test bench?

AR# 46233

LogiCORE IP Video Deinterlacer v1.0 - When performing VFBC writes, why do I see a mismatch between documentation and the example test bench?

描述

When performing VFBC writes, why do I see a mismatch between documentation and the example test bench?

解决方案

There is atypo in the document that can cause some confusion whichis going to becorrected in the next release.

The burst length is1024, but this is in bytes (not words).So, bursting is actually being performed at 256*32-bit words, whilethe documentationindicates 128. The burst size was increased from 128 to 256 to help with real world MPMC performance issues, but the documentation was not properly updated to reflect this change.

Also, Figure 1 below is a screenshot of a full burst simulation followed by the start of the second burst.Theremight be some confusion because the command bus does not align with the start of the data burst.The next command is queued into the VFBC early, that is, before the last data burst ends.

Figure 1: Video Deinterlacer VFBC Write Command
Figure 1: Video Deinterlacer VFBC Write Command

Figure 1: Video Deinterlacer VFBC Write Command

For a detailed list of LogiCORE IP Video Deinterlacer Release Notes and Known Issues, see (Xilinx Answer 41969).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
41969 LogiCORE IP Video Deinterlacer - Release Notes and Known Issues N/A N/A
AR# 46233
日期 12/15/2012
状态 Archive
Type 综合文章
IP