UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 46251

13.4 EDK - How can I use Tcl within XMD to connect to a different device in my JTAG chain?

Description

I am currently debugging a different FPGA in my chain than position 1. How can I do this?

解决方案

In XMD, the default command to accomplish this is:

connect mb mdm -debugdevice devicenr [JTAG_POSITION]

In orderto add a simpler command to XMD's command list, as referenced in (Xilinx Answer 46250), use the process below:


proc custom_connect {elfName JTAGPos} {
connect mb mdm -debugdevice devicenr $JTAGPos
dow $elfName
run
}

This new command can beinvoked by typing:

custom_connect [elfname].elf [jtag_position_number]

链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
46250 13.4 EDK - How can I create a custom XMD command or script? N/A N/A
AR# 46251
创建日期 03/07/2012
Last Updated 12/15/2012
状态 Active
Type 综合文章
Tools
  • EDK - 13.1
  • EDK - 13.2
  • EDK - 13.3
  • EDK - 13.4