AR# 4626

A1.5 Par - Design hangs in PAR after optimization.

描述

A case has been seen where PAR hangs after optimization.
The problem is in the KPATHS timing algorithm which is
new for A1.5.

解决方案

The problem can be avoided by switching to the DFS timing
algorithm which was the default algorithm in A1.4.

setenv XILINX_GRAPHIMP DFS (workstations)
set XILINX_GRAPHIMP=DFS (PCs)

This problem was fixed for 1.5i.
AR# 4626
日期 10/21/2008
状态 Archive
Type 综合文章