UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 466

5.0 PPR - will not guide correctly with a pre-XACT 5.0 lca file

解决方案




PROGRAM: PPR

VERSION: 5.0

PLATFORM(s): All

SHORT DESCRIPTION:

PPR 5.0 can't guide from any lca file created by the pre-XACT 5.0 tools.

ERROR MESSAGE: N/A

LONG DESCRIPTION:

PROBLEM:

User has an lca file created with the pre-XACT 5.0 toolset (either w/PPR or
EDITLCA), and he can't use it as a guide file.

CAUSE:

To support guide, certain information has to be entered into the lca file
during the place and route process. The older tools did not put this
information in, and there is not way to 'go back' and put it in.


SOLUTION:

Re-run the design through PPR 5.0 w/o using a guide file, then use this
lca file as the starting point.

AR# 466
创建日期 08/31/2007
Last Updated 03/22/2000
状态 Archive
Type ??????