UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

的页面

AR# 46614

Kintex-7 FPGA KC705 Evaluation Kit - Usage of GTX TX / RX Polarity Controls on SFP/SFP+ interface

Description

SFP/SFP+ designs using the Kintex-7 FPGA KC705 Evaluation Kit Rev 1.0 boards can used the FPGA transceiver TX and RX polarity control attributes to undo the SFP/SFP+ interface P, N pin swaps.

解决方案

On the Rev 1.0 version of the KC705 board, the FPGA SFP/SFP+ transmitter signals MGTXTXP2 and MGTXTXN2 are swapped.The SFP/SFP+ receiver signals MGTXRXP2 and MGTXRXN2 are also swapped.

Loopback:

SFP/SFP+ Loopback tests or connections to another Rev 1.0 KC705 board work successfully with or without changing the TX and RX polarity control.

Transmitting:

When designing with the KC705 SFP/SFP+ transmitter (MGTXTXP2, MGTXTXN2) interface, the FPGA's GTX TX polarity control should be used to change polarity and compensate for the transmitter's MGTXTXP2, MGTXTXN2 pin swap. No other changes are required for normal operation.

Definition of TX polarity control from the 7 Series Transceiver User Guide is repeated below:
http://www.xilinx.com/support/documentation/user_guides/ug476_7Series_Transceivers.pdf

TX Polarity Control
Functional Description
If TXP and TXN differential traces are accidentally swapped on the PCB, the differential data transmitted by the GTXtransceiver TX is reversed.One solution is to invert theparallel data before serialization and transmission to offsetthe reversed polarity on the differential pair.The TX polarity control can be accessed through the TXPOLARITY input from the fabric user interface. It is driven High to invert the polarity of outgoing data.

Receiving:

Likewise, when receiving a signal on the KC705 SFP/SFP+ receiver (MGTXRXP2, MGTXRXN2) the FPGA's GTX RX polarity control should be used to change polarity and compensate for the receiver's MGTXRXP2, MGTXRXN2 pin swap. No other changes are required for normal operation.

Definition of RX polarity control from the 7 Series Transceiver User Guide is repeated below:
http://www.xilinx.com/support/documentation/user_guides/ug476_7Series_Transceivers.pdf

RX Polarity Control
Functional Description
If RXP and RXN differential traces are accidentally swapped on the PCB, the differential data received by the GTXtransceiver RX are reversed. The GTX transceiver RX allows inversion to be done on parallel bytes in the PCS afterthe SIPO to offset reversed polarityon differential pair. Polarity control function uses the RXPOLARITY input, whichis drivenHigh from the fabric user interface to invert the polarity.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
45934 Kintex-7 FPGA KC705 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A

相关答复记录

AR# 46614
日期 02/12/2013
状态 Active
Type 综合文章
Boards & Kits
  • Kintex-7 FPGA KC705 Evaluation Kit