We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4678

map 1.4:ERROR:baste:263 - The LOC constraint "P21" (a IOB location) is not valid..


Keywords: map, alliance, leonardo

Urgency: Hot

General Description:
Trying to source a global clock buffer from a non-dedicated clock I/O. In VHDL, by making a signal assignment to the input signal in order to force an ibuf
between the input signal and the clock buffer.

When the design is run through MAP, M1 falls over with the error:

ERROR:baste:263 - The LOC constraint "P21" (a IOB location) is not valid for
symbol "reset_200msn.PAD" (pad signal=reset_200msn), which is being mapped
to the following site types: CLKIOB


Leonardo optimizes the ibuf out which is reflected in the resulting netlist.

The reason this has occurred is because the netlist dictates
that the clock signal comes into the device and directly into
the input of a global buffer. However, because the clock
signal is not placed to an IOB with this direct access to a
global buffer, this is an illegal connection.

The solution is to insert an input buffer between the pad and
the global buffer.
AR# 4678
创建日期 09/24/1998
Last Updated 03/27/2000
状态 Archive
Type 综合文章