UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 46904

LogiCORE IP Serial RapidIO Gen2 v1.3 - Core sends out a PNA when receiving control symbols separated by less than 4 idle bytes

Description

LogiCORE IP Serial RapidIO Gen2 v1.3 (and earlier versions)x1 core configuration doesnot handle realignment properly.The problem occurs when control symbols are separated by less than 4 bytes of idle. A PNA is sent out incorrectly as the result of this issue.

解决方案

This is a known issue that is to be fixed in thenext release of the core. A patch is available to work around this issue. Please download the patch from (Xilinx Answer 45708).

Revision History:
03/21/2012 - Initial Release

AR# 46904
创建日期 03/29/2012
Last Updated 05/16/2012
状态 Active
Type 已知问题
IP
  • Serial RapidIO