UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47158

LogiCORE IP Video Timing Controller - Why do I not see blanking signals generated, when I select the blanking signal detection?

描述

Why do I not see blanking signals generated, when I select the blanking signal detection?

解决方案

When selecting the Detection option for the Video Timing Controller, the user should only select the signals which the user will be providing. If the user selects HBLANK and VBLANK but does not provide these inputs to the Timing Controller Generation circuit, the controller will not be able to generate the HBLANK and VBLANK output because no inputs will be measured.

Please see (Xilinx Answer 32754) for a detailed list of LogiCORE Video Timing Controller Release Notes and Known Issues.
AR# 47158
日期 04/06/2012
状态 Active
Type 综合文章
IP
  • Video Timing Controller
的页面