We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47317

Zynq-7000 AP SoC, ID - Incorrect PS Family IDCODE Value


The 7-bit family IDCODE value that software can read in the PS slcr.IDCODE[27:21] register bits is incorrect. The register value reads 0x1D instead of the correct value of 0x1B.


Impact Minor. The mismatch may cause confusion in some tools and by users.
Work-around None. The user needs to be aware of the different IDs.
Configurations Affected All systems using the 7-bit family IDCODE.
Device Revision(s) Affected: Refer to (Xilinx Answer 47916) - Zynq-7000 Design Advisory Master Answer Record

The Zynq-7000 All Programmable SoC Technical Reference Manual specifies the intended value of 0x1B.
The Family ID code read using the PL JTAG interface = 0x1B.
The Family ID code read from the PS SLCR.PSS_IDCODE[27:21] register bits = 0x1D.
AR# 47317
日期 12/16/2013
状态 Active
Type 设计咨询
  • Zynq-7000