UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47440

13.4 PlanAhead - XDC commands in PlanAhead will create an XDC file upon Save, but XDC is not allowed in 13.3 projects

描述

I have a PlanAhead project and open the netlist design.

When I use command %create_clock (e.g.%create_clock -name test -period 10 ) and save the design, the create_clock command will be saved in a newly created XDC file.

But XDC file is not allowed in PlanAhead 13.3.

解决方案

The create_clock should not be available in PlanAhead tool.   It should be available in Vivado Design Suite only.

This issue has been fixed in PlanAhead 14.1.

When %create_clock command is used, a message will be shown: invalid command name "create_clock".

AR# 47440
日期 06/03/2014
状态 Archive
Type 综合文章
Tools
  • PlanAhead - 13.3
的页面