We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47524

LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII - Release Notes and Known Issues for v11.x


This answer record contains the Release Notes for the LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII and includes the following:

  • New Features
  • Supported Devices
  • Resolved Issues
  • Known Issues
For installation instructions, general CORE Generator tool known issues, and design tools requirements, see the IP Release Notes Guide.

For LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v12.0 and later Release Notes, see (Xilinx Answer 54667).


New Features for Latest v11.5 Core

  • v11.5 was released in ISE Design Suite 14.5 with updates listed in the below known issues
  • ISE 14.4 tool support
  • Vivado 2012.4 tool support
  • Updated 7 series transceiver wrapper files

Supported Devices for Latest v11.5 Core

  • Virtex-7
  • Kintex-7
  • Artix-7
  • Zynq-7000
  • Virtex-6
  • Spartan-6
  • Virtex-5
  • Virtex-4
  • Spartan-3

Note: For a complete part and package support list, please check Xilinx CORE Generator interface (under 'Supported Families') for the Ethernet 1000BASE-X PCS/PMA or SGMII Core.

For the previous version "New Features" and "Supported Devices", see the readme.txt or version information file available with the generated core.

Known Issues

This table correlates the core version to the first ISE or Vivado tools release version in which it was included.

Core Version ISE Version Vivado Version
v11.5 updated ISE 14.5 NA
v11.5 ISE 14.4 2012.4
v11.4 ISE 14.2 2012.2
v11.3 ISE 14.1 2012.1
v11.2 ISE 13.4 NA
v11.1 ISE 13.1 NA

The following table provides known issues for the Ethernet 1000BASE-X PCS/PMA or SGMII core starting with v11.1 released in ISE Design Suite 13.1. For previous version of the core, refer to IP Release Notes Guide for the release notes answer record by version.

Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Article Number Article Title Version Found Version Resolved
(Xilinx Answer 55360) mmcm_locked not connected to GT tx_startup_fsm and rx_startup_fsm v11.5 work-around in answer record
(Xilinx Answer 55367) 7 Series GTP and GTH - Update to RX termination v11.5 work-around in answer record
(Xilinx Answer 57166) Updates to 7 series reset logic v11.4 ISE 14.5, v11.5
(Xilinx Answer 53779) Virtex-7 GTH Transceiver - RX Reset Sequence Requirement for Production Silicon v11.4 ISE 14.5, v11.5
(Xilinx Answer 53561) Artix-7 - RX Reset Sequence Requirement for Production Silicon v11.4 ISE 14.5, v11.5
N/A Synchronization logic added to 7-Series GT tx_startup_fsm and rx_startup_fsm inputs v11.4 ISE 14.5, v11.5
(Xilinx Answer 53444) After disabling AN, AN sequences may still be transmitted if core has not gained Synchronization yet v11.4 ISE 14.5, v11.5
(Xilinx Answer 52780) 7 Series GTX Transceivers - Update needed to target Production Silicon v11.4 ISE 14.4, v11.5
(Xilinx Answer 52237) 7 Series Devices - SGMII LVDS Interface - Updated needed to Asynchronous data path constraint v11.4 ISE 14.4, v11.5
(Xilinx Answer 52135) 7 Series - 500ns delay needed for GTTXRESET and GTRXRESET v11.4 ISE14.4, v11.5
(Xilinx Answer 51975) SGMII LVDS interface support for Artix-7 and Zynq devices v11.4 Not Resolved
(Xilinx Answer 51040) 1000BASE-X - Status Vector Reports incorrect value for Auto-Negotiation Pause Ability v11.2 v11.4rev1
(Xilinx Answer 50446) Artix-7 - Missing TXOUTCLK BUFG v11.3 v11.4
(Xilinx Answer 50328) Update to reset logic for 7-Series SGMII with Elastic Buffer v11.3 v11.4
(Xilinx Answer 47358) Virtex-6 - Core will not auto-negotiate - TX data is corrupted v11.1 Not Resolved
(Xilinx Answer 47665) Spartan-6 - Timing Errors maybe seen with Example Design v11.3 Not Resolved
(Xilinx Answer 47526) Vivado 2012.1 - CRITICAL WARNING messages seen in example design v11.3 v11.3rev1
(Xilinx Answer 47666) Vivado 2012.1 - Guidance for Simulating Ethernet IP cores v11.3 N/A
(Xilinx Answer 35338) Meeting GMII setup and hold times on an external interface when targeting Spartan-6 FPGAs v11.1 Not Resolved
(Xilinx Answer 46123) Changes required to implement on 7-Series General ES silicon v11.2 v11.3
(Xilinx Answer 45676) Functional simulation failure when using 1000 BASE-X and VHDL v11.2 v11.3
(Xilinx Answer 44937) Changes required to implement the core on 7-Series Initial ES silicon v11.1 Not Resolved
(Xilinx Answer 43058) Why does the Example Design fail in BitGen when targeting Virtex-7 or Kintex-7 devices? v11.1 v11.2
(Xilinx Answer 42672) 7 Series Transceiver Wrapper - GT Port Name Changes in ISE 13.2 v11.1 v11.2
(Xilinx Answer 43421) GMII_RX_ER not asserted when link lost during frame v11.1 v11.2
(Xilinx Answer 42842) PLLREFCLK selection change causing simulation issue in ISE Design Suite 13.1 v11.1 v11.2
(Xilinx Answer 43059) Error - Invalid target device when running Virtex-7 Example design in 13.2 and later v11.1 v11.2
(Xilinx Answer 44958) Example Design Simulation Does Not Work in ISE 13.2/13.3 v11.1 v11.2
(Xilinx Answer 39193) GTP/GTX Physical DRC failure in MAP v10.5 v11.1

Revision History

08/20/2013 - Added 57166
07/25/2012 - Updated for 14.2 release
05/08/2012 - Initial release



AR# 47524
日期 08/20/2013
状态 Active
Type 版本说明
  • Ethernet 1000BASE-X PCS/PMA or SGMII