UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47529

Zynq-7000 AP SoC, SDIO - SD Capability Register Shows Wrong Max_Block_Length Value

描述

The SDIO controller supports a maximum block length of 512 bytes. The SDIO capability register indicates a max length of 4,096 bytes. The software driver must use the 512 byte length and ignore what is read from the capabilities register.

解决方案

Impact: Trivial. Typically there is no impact on customers since the host driver will use 512-byte blocks regardless of the value in this register. However, for stand-alone applications, this might cause confusion.

Work-around: None.

Configurations Affected: Systems that use the SDIO controller.

Device Revision(s) Affected: Refer to (Xilinx Answer 47916) - Zynq-7000 Design Advisory Master Answer Record

There is no work-around at this time.

AR# 47529
日期 12/16/2013
状态 Active
Type 设计咨询
器件
  • Zynq-7000
的页面