UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47597

Zynq-7000 SoC, Boot IOP - Micron 8Gb (on-die ECC) NAND devices do not work

描述

The Micron Device ID codes (byte 1 of Address 00h of Flash ID parameter tables) that are known to not work in boot mode: 0xA3, 0xB3, 0xC3, 0xD3.

解决方案

 

Impact:Minor.
Work-around:None
Configurations AffectedSystems that use the NAND boot mode and use Micron devices with the ID devices listed.
Device Revision(s) Affected:Refer to (Xilinx Answer 47916) - Zynq-7000 SoC Silicon Revision Differences Answer Record.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47916 Zynq-7000 SoC 器件:芯片修订差异 N/A N/A
AR# 47597
日期 06/13/2018
状态 Active
Type 设计咨询
器件
  • Zynq-7000
的页面