AR# 47694

描述

• New Features
• Supported Devices
• Resolved Issues
• Known Issues

解决方案

New Features

• ISE 14.1 design tools support

Supported Devices

• Virtex-6 XC CXT/LXT/SXT/HXT
• Virtex-6 XQ LXT/SXT
• Virtex-6 Lower Power XC LXT/SXT
• Spartan-6 XC LX/LXT
• Spartan-6 XQ LX/LXT
• Virtex-5 XC LX/LXT/SXT/TXT/FXT
• Virtex-5 XQ LX/LXT/SXT/FXT
• Virtex-4 XC LX/SX/FX
• Spartan-3 XC
• Spartan-3A XC 3AN/3A DSP
• Spartan-3E XC

Resolved Issues

• None

Known Issues Resolved in v4.6rev1

• (Xilinx Answer 52076) LogiCORE IP Tri-Mode Ethernet MAC v4.6 - Runt frames can be incorrectly concatenated or marked good
• (Xilinx Answer 52140) LogiCORE IP Tri-Mode Ethernet MAC v4.6 - The transmitter could lock-up when transmitting in half-duplex mode at 1Gb/s
• (Xilinx Answer 54785) LogiCORE IP Tri-Mode Ethernet MAC v5.5 and earlier - IFG Adjust values that are smaller than 9 will result in TX IFG of 12 when core is generated with half duplex support
  

Known Issues Resolved in v4.6rev2

• (Xilinx Answer 53139) - LogiCORE IP Tri-Mode Ethernet MAC v4.6 - Multiple pause frame requests can result in a corrupted pause quanta being output

Known Issues in v4.6 rev2

• (Xilinx Answer 35336) LogiCORE IP Tri-Mode Ethernet MAC - Meeting GMII setup and hold times when targeting Spartan-6 FPGAs
• (Xilinx Answer 40028) LogiCORE IP Tri-Mode Ethernet MAC and Virtex-6 FPGA Embedded Tri-mode Ethernet MAC Wrapper v2.1 and later - Meeting GMII and RGMII setup and hold times when targeting Virtex-6 FPGAs

Download Rev2 Update

To get the Rev2 update to resolve the issue described above, apply the attached patch at the bottom of this AR to the Xilinx ISE 14.x software installation.

Install the patch by extracting the contents of the ".zip" archive to the root directory of the Xilinx ISE 14.x software installation. Select the option that allows the extractor to overwrite all of the existing files and maintain the directory structure predefined in the archive. After installing the patch, regenerate the LogiCORE IP Tri-Mode Ethernet MAC v4.6 core in the 14.x CORE Generator tool.For further information on finding the Xilinx installation and using environment variables, see (Xilinx Answer 11630).

NOTE: You might need system administrator privileges to install the patch if you do not have write permissions to the Xilinxinstallation directory.

附件