UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4770

A1.5/F1.5 CPLD - Signature/User Code always generates "sign" when not using default option.

Description

Keywords: F1.5, Foundation, Signature, sign, CPLD, programming

Urgency: Standard

General Description:
When you specify a Signature under the Programming tab in the
Implementation options dialog, you get this message:

hprep6 -i fe_temp -r jed -a -l christes.log -n signature_str

Programming File Generator: version M1.5.19
(c) Copyright 1989-1997 Xilinx Inc. All rights reserved.
Signature length is limited to 4 characters, using 'sign'.

解决方案

1

The workaround is to leave the default "Use <design name>" option and change the actual name of the project. The signature will then be the first 4 characters of the project name.

This is a software error which has been fixed in the latest 1.5 service pack
currently available on our website.

http://support.xilinx.com/support/techsup/sw_updates/

2

Another workaround:
* Run the flow engine all the way through
* Go back one step
* Use the command line:
hprep6 -i fe_temp -r jed -a -l logfile.log -n test

This will use the 4 characters: test as your signature.

AR# 4770
创建日期 10/07/1998
Last Updated 08/27/2001
状态 Archive
Type 综合文章