We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47785

14.1 - EDK/SDK - Unable to run/debug zynq FSBL application


When running a Zynq FSBL application, SDK gives following error.
An internal error occured during "Launching zynq_fsbl_0.elf" java.lang.NullPointerException.

How can I work around this?


To work around this issue, run the run/debug FSBL application from the XMD. To do this:

1. Launch the XMD tool from SDK (Xilinx Tools -> XMD console).
2. Navigate to the elf file (this is in the Debug folder in the SDK workspace).
3. Download using the XMD dow command.
4. Run using the XMD run command.

Note: For a comprehensive guide on the XMD commands see chapter 10 of the Embedded System Reference Manual (here)
AR# 47785
日期 05/08/2012
状态 Active
Type ??????
  • Zynq-7000
  • EDK - 14.1