UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47794

13.x EDK, XPS_LL_TEMAC v2.03.a - Ethernet AVB does not work for TEMAC1 in dual TEMAC implementations

描述

If the Ethernet AVB endpoint feature is enabled for TEMAC1 in a dual TEMAC implementation, it has been observed that this functionality does not work.

解决方案


If you are targeting a Virtex-6 device, consider moving to AXI architecture and use AXI Ethernet.

If you are targeting an older architecture or moving to AXI is not an option, then there are two ways to work around this issue:
  • use two different instances of XPS_LL_TEMAC and enable the Ethernet AVB end point feature for TEMAC0 in both instances, OR
  • generate the Ethernet MAC core using Coregen along with the Ethernet AVB end point and port it to EDK.
AR# 47794
日期 05/09/2012
状态 Active
Type 已知问题
Tools
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • More
  • EDK - 12.4
  • EDK - 13.0
  • EDK - 13.1
  • EDK - 13.2
  • EDK - 13.3
  • EDK - 13.4
  • EDK - 14.1
  • EDK - 14.2
  • Less
IP
  • XPS LL TEMAC
  • Ethernet AVB
的页面