We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47905

13.x/14.1 - In Virtex-6 devices, Post CRC fails when GTH DRP is accessed


There is an issue with masking of DRP spaces for Virtex-6 devices with GTH transceivers. If the DRP is used to change attributes on a GTH, you might see a Readback CRC error flagged spuriously.


This is not a real error. The issue occurs because the DRP space is not masked correctly in the bit file; therefore, any change results in the Readback signature changing and flags the error.

This issue has been resolved in ISE Design Suite 14.2. If you are not using the GTH DRP, then you will not experience any problems. If you require further assistance with this issue, please contact Xilinx Technical Support: http://www.xilinx.com/support/clearexpress/websupport.htm

AR# 47905
日期 06/21/2013
状态 Active
Type 综合文章
  • Virtex-6 HXT
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • More
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less