UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 483

5.0 PPR - Possible cause of Error 5607: Design has not been flattened

解决方案




PROGRAM: PPR

VERSION: 5.0

PLATFORM(s): ALL

ERROR MESSAGE: *** PPR: ERROR 5607:
Design has not been flattened.

PROBLEM: PPR may issue the above error message when the input
design targets an XC3000A/L or XC3100A family device.

CAUSE: The .MAP file was generated for an XC3000 or XC3100 device.
.MAP files for XC3000/3100 devices are different than .MAP
files for XC3000A/L or 3100A devices. The former cannot
be read properly by PPR.

SOLUTION: Run XNFPREP and XNFMAP again, targeting the correct
family. This will generate the correct .MAP file for
PPR.

AR# 483
创建日期 08/31/2007
Last Updated 03/22/2000
状态 Archive
Type ??????