We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4838

M1.5 - Floorplanner FAQ: Differences between M1 and XACT


Keywords: M1, Floorplanner, XACT, differences

Urgency: Standard

General Description:
This solution record describes the major differences between M1 and XACT. In appearance and general manner of operation, they are very similar. All of the major functions provided in XACT are still present in M1.


The main differences are:

1. Infrastructure changes are required to integrate the tool into the M1 flow. Because the underlying files (.ngd, .ncd) in M1 are different from those in XACT (.map, .lca), a whole new system was created to support floorplanning.

2. Area-based floorplanning is a truly new and powerful function that aids large FPGA designs. This was not a significant capability in XACT.
AR# 4838
日期 07/09/2001
状态 Archive
Type ??????