UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4923

Foundation Express F1.5i/2.1i: HDL macros cannot have hierarchy or user VHDL libraries

Description

Keywords: Foundation, Express, library, VHDL, create, 1.5, 1.5i, 2.1i, hierarchy

Urgency: Standard

General Description:
When creating an HDL macro within a schematic project in Foundation F1.5i or 2.1i, there is no
way to refer to other HDL files. Therefore, module compilation cannot refer to lower levels of
HDL hierarchy, nor can a VHDL file refer to a VHDL user-created library.

All HDL modules must be entirely contained in one HDL file.

解决方案

When attempting to create an HDL macro, synthesis will fail with errors. Here is a way to
work around this limitation:

1. After the macro generation has failed, open the Windows Explorer to your project directory.
You will see a directory called dpmcomp.tmp. Descend into this directory and double-click
on dmpcomp.tmp.exp. This will open the standalone FPGA Express GUI with the correct
project loaded.


2. Use the standalone GUI to add any required HDL files. Right click on the existing HDL file
on the left hand side to select New Library. Give it the appropriate name and add your library
VHDL files to this library.

For lower levels of hierarchy, simply add these files to this project.


3. After all the necessary files have been added, right click on the macro (top-level) HDL file
and select Update File to verify that everything checks out. Then, select its entity and
Synthesize. Be sure to select the correct Xilinx device and check the "Do not insert I/O
Pads" option.

Then write the XNF file to your Foundation project directory.


4. Open the schematic editor and select Hierarchy -> Create Macro Symbol from Netlist.
Choose the recently created XNF file and click Open. This will build a symbol and a
simulation file for this project's library.


Remember, because this macro was created outside the Foundation environment, Foundation
will not be able to automatically update it after changes to the HDL file(s) have been made.
You will need to re-synthesize the code (use the Update command), re-write the XNF file, and
re-import that XNF into Foundation.
AR# 4923
创建日期 10/28/1998
Last Updated 03/07/2002
状态 Archive
Type 综合文章