2. 技术支持
  3. AR# 5035: M1.5 Spartan mapper can not fit design that fit in M1.4.
  4. AR# 50352: KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810) - SFP_RS1 Board Connection Incorrect in Table 1-14

AR# 50352

|

KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810) - SFP_RS1 Board Connection Incorrect in Table 1-14

描述

In Table 1-14 of the KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810), it lists Jumper J26 as the jumper associated with signal SFP_RS1. However, the KC705 schematic shows J28 as the jumper associated with this signal.

Which one is the correct jumper?

解决方案

The KC705 schematic is correct - J28 is the jumper that is used in conjunction with the signal SFP_RS1.

50352-1.jpg
50352-1.jpg



This information has been updated intheKC705 Evaluation Board for the Kintex-7 FPGA User Guide (UG810) (v1.2).

AR# 50352
日期 02/11/2013
状态 Active
Type 综合文章
器件
Boards & Kits
People Also Viewed