I am attempting to implement and generate a bit file with a ZC702 TRD (target reference design). However, an error similar to the following occurs indicating that I do not have a license for axi_vtc:
INFO:coreutil - No license for component found. You may use the customization GUI for this component but you will not be able to generate any implementation or simulation files.
For license installation help, please visit: www.xilinx.com/ipcenter/ip_license/ip_licensing_help.htm
For ordering information, please refer to the product page for this component on: www.xilinx.com FLEXlm Error: No such feature exists. (-5,21)
ERROR:EDK:1596 - IPNAME:axi_vtc INSTANCE:VTC_0 - /EDA/zynq_proj_1/hw/pa_proj/zynq_proj.srcs/sources_1/edk/xps_proj/_xps_tempmhsfilename.mhs line 266 - invalid license or no license found!
INFO:coreutil - No license for component found. You may use the customization GUI for this component but you will not be able to generate any implementation or simulation files.
For license installation help, please visit: www.xilinx.com/ipcenter/ip_license/ip_licensing_help.htm
For ordering information, please refer to the product page for this component on: www.xilinx.com FLEXlm Error: No such feature exists. (-5,21)
ERROR:EDK:1596 - IPNAME:axi_vtc INSTANCE:VTC_0 - /EDA/zynq_proj_1/hw/pa_proj/zynq_proj.srcs/sources_1/edk/xps_proj/_xps_tempmhsfilename.mhs line 266 - invalid license or no license found!
Do I need a license for this IP even though it is part of the reference design?
Is there any evaluation license for AXI_VTC we can use?
Yes, the IP license is required for this reference design. However, an evaluation license will allow the implementation and bit file generation to complete.
you can obtain an evaluation license by following these steps:
Note: The above steps were taken from the LogiCORE IP Video Timing Controller Product Guide (PG016).
AR# 50713 | |
---|---|
日期 | 11/07/2013 |
状态 | Active |
Type | 综合文章 |
器件 | |
Tools | |
IP |