UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 50889

LogiCORE IP Serial RapidIO Gen2 v1.5 (ISE 14.2/Vivado 2012.2) - Device ID is set to 8 bits even though 16-bit value is selected in the GUI

描述

If I setthe Device ID in the GUI, the upper 8 bits will always be 00. For example, ifa 16-bit device ID is set in the GUI as '1234', the default Device ID value would be '0034' instead of '1234'.

解决方案

This is a known issue to be fixed in a future release of the core.

In the meantime, to work around this issue, write to the register to get it to be the correct '1234' value.

Revision History
07/25/2012 - Initial release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
50829 LogiCORE IP Serial RapidIO Gen2 v1.5 - Release Notes and Known Issues for ISE 14.2 and Vivado 2012.2 Design Tools N/A N/A
AR# 50889
日期 01/21/2013
状态 Active
Type 已知问题
Tools
  • ISE Design Suite - 14.2
  • Vivado - 2012.2
IP
  • Serial RapidIO
的页面