UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 50927

LogiCORE IP Floating Point Operator (FPO) v6.1 - Why do I get a "Failed to compile" error when attempting to use the Vivado Simulator 2012.2 tool?

描述

Why do I get the following "Failed to compile" error when attempting to use the Vivado Simulator 2012.2 tool?

Floating point_v6.1 core XSIM  vivado simulation failed with the following error.
INFO: [Runs 36-130] *** Running xelab
ERROR: [Runs 36-25] xelab application returned error(s). Please see '/proj/xresults/arizona/test/vivsim_xsim/coregenIP/14.2_0625/lin64/floating_point_v6_1/DEF
ERROR: [Common 17-69] Command failed: Failed to compile the design!
INFO: [Common 17-206] Exiting Vivado...

解决方案

This is a known issue with the Vivado Simulator 2012.2 tool, which is resolved in version 2012.3.

(Xilinx Answer 50909) - Vivado Simulator 2012.2 behavioral simulation, is not support when using the Floating Point Operators v6.1.

For a detailed list of LogiCORE Floating Point Operator Release Notes and Known Issues, see (Xilinx Answer 29598).

AR# 50927
日期 10/09/2013
状态 Active
Type 综合文章
器件
  • FPGA Device Families
Tools
  • Vivado Design Suite - 2012.2
IP
  • Floating-Point Operators
的页面