We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51141

System Generator and PlanAhead 14.1 - When opening an MDL from within a PlanAhead project the device can get reset to default, causing failures


After adding my MDL file into a PlanAhead 14.1 project and trying to generate the MDL, or, alternatively, opening the MDL from within PlanAhead, the following errors occur:

Error using ==> xlMapFamily at 60
xlMapFamily: wrong parameter value pm 2 mask: Spartan-3A DSP
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlpartchoicestring.p>xlpartchoicestring at 3
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlpartchoicechosen.p>xlpartchoicechosen at 14
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlSyncParamsForPA.p>xlSyncParamsForPA at 22
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlGenerateForPA.p>xlGenerateForPA at 30


This is a known issue in 14.1. It does not occur in PlanAhead 14.2.



AR# 51141
日期 11/28/2012
状态 Active
Type 综合文章
  • PlanAhead - 14.1
  • System Generator for DSP - 14.1