We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5133

Virtex - Do any power sequencing issues exist for VCCINT, VCCO, and VREF?


For Virtex, do any issues exist regarding the order in which you power up the different voltage supplies?

NOTE: For information on Virtex-E power sequencing, please see (Xilinx Answer 10129).


There are no restrictions on the order of VCCO, VCCINT, and VIN power applications. For more information, please see the Virtex Data Sheet -> Module 3 Electrical Characteristics -> DC Characteristics:

Device lifetime information is provided in the Quality and Reliability report:
(Check the Quarterly report for Device Hour.)

If, after power-up, the VCCINT is lost, the I/Os will go into a 3-state condition and return to their pre-configuration state. If VCCO is lost to Banks 2 and 3, the device will also lose its configuration.

AR# 5133
日期 02/26/2013
状态 Active
Type 综合文章
  • Virtex