We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 514

5.1 XC3000A PPR - PPR Routes 3000A Pip in the Wrong Direction


Keywords: pip, ppr, route

Urgency: standard

General Description:

DRC Reports: No Sources reachable from programmed pip

PPR routes a PIP in the wrong direction. The report file shows 0 unroutes,
but the Design Rules Check (DRC) run by XDE or MakeBits gives ther error
message listed above.

This is caused by a bug in PPR 5.1.


All PPR 5.1 users should upgrade to either the latest XACT release (PPR 5.2.1),
or use the M1 toolset, where this bug does not exist. If this is not feasible, then the following is a workaround:

Use XDE or unroute and then re-route that net, or rerun PPR with a different
seed and it shouldn't repeat the error. Be sure to always run DRC to check
for this problem.

AR# 514
日期 03/22/2000
状态 Archive
Type ??????