UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51668

Xilinx MIG 7 Series Solution Center Design Assistant - Simulation Parameters

Description

This section of the MIG 7 Series Design Assistant focuses on the Simulation Parameters for MIG 7 series designs. Below you will find information related to this topic.

Note: This article is part of the Xilinx MIG Solution Center (Xilinx Answer 51313). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

解决方案

A complete list of the simulation parameters and their descriptions can be found in the 7 Series FPGAs Memory Interface Solutions User Guide (UG586), see the "Getting Started with the CORE Generator Tool" -> "Modifying the Example Design" section, Table 1-11, and "Customizing the Core," Table 1-36.

Revision History
09/20/12- Initial Release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
51666 Xilinx MIG 7 系列解决方案中心设计助手 - 仿真 N/A N/A
AR# 51668
创建日期 09/18/2012
Last Updated 10/17/2013
状态 Active
Type 解决方案中心
器件
  • Artix-7
  • Kintex-7
  • Virtex-7
IP
  • MIG 7 Series