UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51856

iMPACT SVF File Playback Walkthrough

Description

How do I play a SVF/XSVF file in iMPACT?

解决方案

SVF and XSVF files are added to an iMPACT window to be played the same way you would manually add a ".bsd" file.

  1. Launch iMPACT as normal and double-click Boundary Scan to enter Boundary Scan Mode.
  2. Right-click on the open window and select Add Xilinx Device... or use the Edit menu as shown:
    Add_device.png
    Add_device.png


    A file prompt appears, select the location where the SVF file is saved.

    Note that the SVF file should typically already contain the JTAG information for the chain.The TDI and TDO lines should mirror those as seen by the programmer so even a multiple device chain may show as a single file in the interface here:

    SVF_added.png
    SVF_added.png


  3. From here, select the SVF file (so it appears green) either select Execute Svf/Xsvf from the iMPACT Processes window, or right-click the file in the Boundary Scan window and select the operation from the menu that appears.
    svf_play_suceed.png
    svf_play_suceed.png


    If the playback is successful, a message appears in the iMPACT window.

链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
51855 iMPACT SVF File Generation Walkthrough N/A N/A
AR# 51856
创建日期 09/17/2012
Last Updated 09/18/2012
状态 Active
Type 综合文章
器件
  • FPGA Device Families
Tools
  • ISE Design Suite