UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52012

Zynq-7000 AP SoC, Boot Sys - INIT_B pin does not indicate boot error status

描述

A design enhancementadds functionality in the INIT_B configuration pin.

解决方案

The enhancement is for the BootROM to use the INIT_B pin to indicate when a boot error has been detected. The BootROM controls the logic level on the INIT_B pin indirectly by writing to the devcfg.CTRL[PCFG_PROG_B] bit.

In 7z020/45 CES devices , the INIT_B pin does not indicate a PS boot failure.

Impact:
Trivial.
Work-around:
None.
Configurations Affected:
All.
Device Revision(s) Affected: Refer to Zynq-7000 Device Advisory Master Answer Record
AR# 52012
日期 01/31/2013
状态 Active
Type 设计咨询
的页面