UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52082

Getting Started with the Kintex-7 FPGA KC705 Embedded Kit (UG913) v1.0 - There is no reference to J69

描述

The Getting Started with the Kintex-7 FPGA KC705 Embedded Kit User Guide (UG913) v1.0 does not reference the J69 jumper.

How should this jumper be set to ensure the Targeted Reference Design runs correctly?

解决方案

If you are running the Targeted Reference Design on the KC705 Embedded Kit, jumper J69 needs to be set correctly. The default jumper setting for J69 is across pins 1-2.
Jumper settings required to run the Video Demonstration can now be found in UG913, v1.2.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
52970 Kintex-7 FPGA Embedded Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 52082
日期 02/01/2013
状态 Active
Type 综合文章
Boards & Kits
  • Kintex-7 FPGA Embedded Kit
的页面