UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52175

14.3/2012.3 XPS - XPS MIG process crashes or does not run after upgrading from XPS 14.2/2012.2 to EDK 14.3/2012.3

描述

After upgrading an XPS 14.2/2012.2 project to XPS14.3/2012.3 when using the DRAM part MT8KTF51264HZ-1G9-1.5 the "Configure IP..." process fails to open the MIG GUI. 

The log file <XPSProjectName>__xps\DDR3_SDRAM\mpmclog.txt contains the following error:

Error:- Invalid Memory Part MT8KTF51264HZ-1G9-1.5.Check that MIG is configured to a valid mem part.

How do I resolve this issue?

解决方案

This issue is caused by the renaming of the MT8KTF51264HZ-1G9-1.5 part name to MT8KTF51264HZ-1G9.

To fix this issue, open the project MHS file and edit the C_MEM_PARTNO parameter as follows:

PARAMETER C_MEM_PARTNO = MT8KTF51264HZ-1G9

AR# 52175
日期 10/15/2014
状态 Active
Type 综合文章
器件
  • Kintex-7
  • Artix-7
  • Virtex-7
  • Zynq-7000
IP
  • MIG 7 Series
的页面