AR# 52277

Soft Error Mitigation (SEM) v3.3 - Vivado 2012.3 produces CRITICAL WARNINGs which can be ignored

描述

When using Soft Error Mitigation (SEM) IP with Vivado 2012.3, there are new CRITICAL WARNINGs that may be issued in relation to the XDC constraints.

解决方案

When implementing SEM v3.3 IP in Vivado 2012.3, the tools will issue CRITICAL WARNINGs associated with the set_max_delay constraints in the example XDC, which are used to constrain the timing paths from the FRAME_ECC primitive to the SEM controller. The CRITICAL WARNINGs have the following form:

CRITICALWARNING: [Constraints 18-515] set_max_delay: Forcing 'example_cfg/example_frame_ecc/SYNDROME[3]' to be timing startpoint. There will be no hold timing paths from this pin unless set_min_delay is used to constrain the paths.

CRITICAL WARNING: [Constraints 18-515] set_max_delay: Forcing 'example_cfg/example_frame_ecc/ECCERRORSINGLE' to be timing startpoint. There will be no hold timing paths from this pin unless set_min_delay is used to constrain the paths.

These CRITICAL WARNINGs may be safely ignored. These CRITICAL WARNINGs are incorrectly issued by the tools, and it is not necessary to use the set_min_delay constraint on the path, or to take any further action.

本答复记录是否对您有帮助？

链接问答记录

主要问答记录

Answer Number	问答标题	问题版本	已解决问题的版本
44541	Soft Error Mitigation Controller - Release Notes and Known Issues for v1.1 to v3.4	N/A	N/A

AR# 52277
日期	11/02/2012
状态	Active
Type	综合文章
Tools	Vivado - 2012.3
IP	Soft Error Mitigation

的页面